Home /Kayak Setup Guides /How to setup the Jaspara Quest Angler Inflatable Fishing Kayak

How to setup the Jaspara Quest Angler Inflatable Fishing Kayak

A Guide to Setting Up Your Quest Angler Inflatable Kayak

The Jaspara Quest Angler inflatable kayak offers a rare combination for fishing enthusiasts: a truly lightweight boat that doesn't sacrifice performance, comfort, or features. At just 14.5 kg, it's easy to transport and handle, but its intelligent design ensures a stable and efficient platform for a great day of fishing. One of its best features is its simple and quick setup process, which allows you to get from your car to the water in minutes.

This guide will walk you through the easy steps to set up your Quest Angler. We’ll cover everything from inflation to seat installation, and provide tips on its optional components so you can customize your kayak for any adventure.

Step 1: Unroll and Prepare for Inflation

Start by taking everything out of the carry bag and unrolling the kayak on a flat, clear surface. Before you begin inflating, you need to prepare the three air valves—two for the side chambers and one for the floor.

Locate the stem in the center of each valve. It has two positions: open (down) and closed (up). Push the button and turn it slightly to make it pop up. This is the "inflate" or closed position. This is a crucial step because it prevents all the air from rushing out the moment you remove the pump hose.

Step 2: Inflate the Side Chambers

The Quest Angler has two side chambers that provide its main structure and stability. These chambers should be inflated to a pressure between 3 and 5 PSI.

  • Use 3 PSI if you are a lighter person. This provides plenty of rigidity while making the kayak feel a bit more forgiving on the water.
  • Use 5 PSI if you are a heavier person or carrying more gear. This maximizes the kayak's stiffness and performance.

Using an electric pump is highly recommended, as it makes the inflation process much faster and easier. Simply set the desired PSI on your pump and let it do the work.

Step 3: Install the Optional Foot Pegs

The kayak comes with foot pegs that you can install inside the cockpit. These are entirely optional, but many paddlers find them very useful. Bracing your feet against the pegs allows you to use your whole body—including your legs and core—when you paddle. This results in a more powerful and efficient stroke, which is especially helpful when paddling against wind or for longer distances.

If you prefer a more relaxed paddling style or find the pegs get in the way, you can simply leave them out.

Step 4: Add the Optional Splash Guards

You will find two splash guards, one for the bow (front) and one for the stern (back). Like the foot pegs, these are optional. On a perfectly calm day, you might choose to leave them off.

However, it is generally a good idea to use them. The splash guards prevent any water that splashes onto the deck from running directly into your kayak, keeping you and your gear drier. The rear guard is particularly useful when you are launching or landing on a beach where small waves might break behind you.

Step 5: Inflate the Drop-Stitch Floor

The floor of the Quest Angler is made from a different material than the side chambers. It is a high-pressure, drop-stitch floor, the same technology used in inflatable stand-up paddleboards. This floor becomes incredibly rigid when inflated, providing a firm and stable platform that you can even stand on.

Because it's a high-pressure chamber, the floor needs to be inflated to 10 PSI. If you are using an electric pump, you will need to adjust the pressure setting after inflating the side chambers. This rigid floor is one of the key features that gives the Quest Angler its excellent performance and stability, so be sure to inflate it to the correct pressure.

Step 6: Install and Adjust the Seat

With the kayak fully inflated, the final step is to install the seat.

  1. Place the seat in the cockpit and locate the front straps. Clip these straps to the D-rings at the front of the seating area.
  2. Tighten these front straps completely. This will pull the front of the seat up and provide crucial under-thigh support.
  3. The back straps are optional, but they are very helpful for keeping the seatback upright, especially when you are getting in and out of the kayak. Clip them to the rear D-rings to prevent the seat from flopping forward.

Final Touches: Valve Caps and the Fin

Before you launch, make sure to screw the caps back onto all three air valves. The valves themselves are airtight, but the caps act as a fail-safe to prevent any accidental air loss and keep out sand or debris.

Your kayak also includes a removable fin. While the fin box is useful for attaching a propeller motor, the fin itself is not necessary for tracking. The Quest Angler is designed to track straight and handle well without the fin, so you can leave it off to have one less thing to worry about.

Why the Quest Angler is Great for Fishing

The Quest Angler was designed from the ground up with fishing enthusiasts in mind. Its simple setup is just the beginning. The lightweight design makes it easy to get to those hard-to-reach fishing spots, while the stable, drop-stitch floor provides a solid platform for casting. It offers the performance and features of a much heavier boat in a portable, user-friendly package. You can spend less time setting up and more time on the water, doing what you love.

 

Not sure which kayak is right for you?

Every year we help thousands of people choose the best kayak for their needs. There are so many factors to consider and so many kayak to choose from.

Don't get burnt, let us help you too.